WR-1000e Specifications

Receiver type PLL-based triple-conversion superheterodyne
Frequency range
AM, SSB, FM-N 0.5-1300 MHz
FM-W 30-1300 MHz
Note: In some countries certain frequencies may be omitted due to government legislation.
Tuning resolution 100 Hz (BFO: 5 Hz)
Mode AM, SSB/CW, FM-N, FM-W
Image/Spurious Rejection
0.5 - 513 MHz    65dB
798-1300 MHz   40dB
Dynamic range   65dB
Signal meter linearity   ± 5dB
Selectivity
AM,SSB/CW 6 kHz @ 6dB
FM-N 17 kHz @ 6dB
FM-W 230 kHz @ 6dB
Scanning speed
AM,SSB/CW 10 channels/s
FM-N, FM-W 50 channels/s
Sensitivity

AM/SSB/CW 10dB S/N

FM-N/FM-W 12dB SINAD

Mode 0.5-1.5 MHz 1.5-30 MHz 30-1000 MHz 1-1.3 GHz
AM 5µV 1µV 1.5µV 5µV
SSB 2.5µV 0.5µV 0.7µV 2.5µV
FM-N 1µV 0.5µV 0.5µV 2µV
FM-W   -   - 2µV 4µV
Intermediate frequencies
f [MHz] IF1 [MHz] IF2 [MHz]
0.5-299.999 556.325 58.075
300-512.999 249.125 58.075
513-797.999 58.075   -
798-1105.999 249.125 58.075
1106-1300 556.325 58.075
Mode IF3 [MHz]
AM,SSB,FM-N 0.455
FM-W 10.7
Frequency stability 10 ppm (0 to 60° C)
Antenna input 50 ohm (BNC connector)
Audio output 0.2W (8 ohm load)
Specifications are subject to change without notice.

Click on the receiver image to enlarge the view:

WR-1000e Receiver

Click on the screen image to see the virtual front panel:

WR-1000i Panel


Check out also:

Spectrum Scope
Visitune
Database Manager
Digital Suite
Trunking Option
PC Card Adapter option
Portable Power Source option
Comparative receiver summary
Third party developer's information

Back to WR-1000e