WiNRADiO Future of radio 
   

   WR-1550e Specifications
Receiver type PLL-based triple-conversion superheterodyne
Frequency range
AM, SSB, FM-N 0.15-1500 MHz
FM-W 30-1500 MHz
Note: In some countries certain frequencies may be omitted due to government legislation.
Tuning resolution 10 Hz (USB/LSB/CW: 1Hz)
Mode AM, SSB/CW, FM-N, FM-W
Image/Spurious Rejection   65dB typ.
Dynamic range   70dB
Signal meter linearity   ±5dB
Selectivity
SSB/CW 2.5 kHz @ 6dB
AM 6 kHz @ 6dB
FM-N 15 kHz @ 6dB
FM-W 230 kHz @ 6dB
Scanning speed
AM,SSB/CW 10 channels/s
FM-N, FM-W 50 channels/s
Sensitivity

AM/SSB/CW 10dB S/N

FM-N/FM-W 12dB SINAD

Mode 0.15-1.5 MHz 1.5-30 MHz 30-1000 MHz 1-1.5 GHz
AM 25µV 1µV 1µV 1.9µV
SSB 0.9µV 0.3µV 0.3µV 0.4µV
FM­N 0.4µV 0.4µV 0.4µV 0.4µV
FM­W   -   - 1.0µV 1.0µV
Intermediate frequencies
f [MHz] IF1 [MHz] IF2 [MHz]
0.15-399.999 556.325 58.075
400-807.999 249.125 58.075
808-1113.999 249.125 58.075
1114-1500 556.325 58.075
Mode IF3 [MHz]
AM,SSB,FM-N 0.455
FM-W 10.7
Frequency stability 10 ppm (0 to 60° C)
Antenna input 50 ohm (BNC connector)
Audio output 0.2W (8 ohm load)
Specifications are subject to change without notice.
Click on the receiver image to enlarge the view:

WR-1500e Receiver

Click on the screen image to see the virtual front panel:

WR-1500i Panel

Check out also:

 Spectrum Scope
 Visitune
 Digital Suite option
 Advanced Digital Suite option
 Trunking option
 Database Manager option
 PC Card Adapter option
 USB Adapter option
 Portable Power Source option
 Comparative summary of WiNRADiO receivers
 Mobile Applications
 Third party developer's information
 Order Information

Back to WR-1550e