WiNRADiO AMFE™ Antenna Multiplexer and Frequency Extender

 
Technical Specifications
Description Antenna multiplexer and single-stage frequency downconverter
Input frequency range
HF input: 0.4 to 30 MHz
VHF input: 30 to 100 MHz
UHF input: 100 to 1800 MHz
SHF input: 1796 to 3500 MHz (WR-AMFE-3500)
  1796 MHz to 8599 MHz (WR-AMFE-8600)
Output frequency range 96 to 1800 MHz (WR-AMFE-3500)
DC to 1800 MHz (WR-AMFE-8600)
Gain
HF section: 0 to 3 dB
VHF section: 5 to 7 dB
UHF section: 1 to 5 dB
SHF section: 10 to 12 dB (WR-AMFE-3500)
  -3 to 12 dB (WR-AMFE-8600)
NF
HF section: 2.5 dB
VHF section: 6 dB
UHF section: 3.5 dB
SHF section: 3 dB (AMFE-3500)
8 dB (AMFE-8600)
IIP1
HF section: +5 dBm
VHF section: +2 dBm
UHF section: +3 dBm
SHF section: -15 dBm (AMFE-3500)
-15 to 0 dBm (AMFE-8600)
Isolation Input/Input HF, VHF: 60 dB min.
UHF, SHF: 40 dB min.
HF, UHF, UHF versus SHF: 30 dB min.
Isolation Input/Output HF, VHF: 40 dB min.
UHF, SHF: 30 dB min.
Mixer Spurious Rejection Better than -40 dBc
LO leakage to IF Better than -56 dBm
Connectors 5 x SMA
Power jack OD=5.5mm ID=2.5mm (center positive)
LO stability 0.5 ppm (0 to 60°C)
0.01ppm (0 to 60°C) with optional OCXO (AMFE-8600HS)
Power 12V DC ±10% @ 450 mA max
12V DC ±10% @ 800 mA max with optional OCXO (AMFE-8600HS)
Interface USB (1.0 and 2.0 compatible)
Dimensions Length: 164 mm (6.46")
Width: 96 mm (3.78")
Height: 41 mm (1.61")
Weight 310 g (10.89 oz)

Specifications are subject to change without notice due to continuous product development and improvement.


 WR-AMFE General Product Description
 WR-AMFE Application Software
 WR-AMFE Software Developer Information
 WR-AMFE Ordering Information

Interested? Please use our Rapid Response Form to register your interest in this product, or to request more information.