Please note:
 This software is provided here for evaluation purposes or as an upgrade for existing users.
Certain innovative aspects of this software are protected by US and international patents or pending patent applications.
Reverse engineering or copying WiNRADiO software features for commercial purposes is prohibited by relevant
US and international legislation.
To install the software, download the file to a temporary folder and unzip it. Then run the unzipped EXE file.
If you experience downloading problems, use an alternative mirror location. If the downloaded ZIP file does not unzip,
please check the file size to make sure that the entire file has been received. If the size is different from what it should be,
please download the file again.
Starting from version 3.20, automatic detection of serially-connected receivers has been removed to make the software faster and more reliable
(it has been shown that this was causing problems in some systems if other installed software or hardware claimed the use of the serial port).
During installation, you will be asked to configure the receiver settings. If the suggested default is not appropriate,
remove it, then use the Add Receiver button. Configure the receiver by clicking on the appropriate tab and selecting
the connection parameters. Then click on the OK button. The WiNRADiO control panel can be accessed any time under Start | Settings | Control panel. |
