WR-G315e

Overview

The WiNRADiO WR-G315e is a software-defined high-performance VHF/UHF receiver (9 kHz to 1800 MHz, extendable to 8599 MHz using an optional Antenna Multiplexer and Frequency Extender) with a USB interface, an external version of the WR-G315i receiver.

This receiver is intended for government, military, security, surveillance, broadcast monitoring, industrial and demanding consumer applications.

WiNRADiO WR-G313 receiver in use

The receiver offers an unparalleled flexibility given its SDR architecture, respectable dynamic range, and high sensitivity. Many useful features complement the receiver, making it capable of filling not only the role of a monitoring receiver but also that of a measuring receiver, such as the calibrated S-meter showing the received signal levels in dBm, µV or S-units, down to the ‑140 dBm noise floor, several spectrum analyzers, and many other features not usually found on receivers of this price.

Hardware

WiNRADiO WR-G315e receiver

The receiver connects to an IBM-compatible PC via the USB port. Several receivers can be controlled by a single PC to form a multi-channel HF receiver system.

The receiver has its own on-board DSP, and does not rely on the PC sound card for the signal input; the digitization is done in the receiver itself, using a high-performance analog-to-digital converter. As the DSP performs the final stage IF filtering and all demodulation, this receiver is entirely software-defined, which means that additional demodulation or decoding modes can be easily added by a mere software change. (For example, an optional DRM decoder/demodulator is also available.)

Easily installed to any modern computer with the USB interface, this receiver represents an excellent mobile solution for VHF/UHF listening and monitoring.

 

Software

The WR-G315e software contains numerous advanced features such as three types of scanning, five types of squelch, many tuning options, virtually unlimited memories and a rich on-line help facility:

WR-G315 Front Panel

There are numerous demodulation modes, continuously variable IF bandwidth 1 Hz to 15 kHz (in 1 Hz increments), a 20 kHz wide real-time spectrum analyzer with 16 Hz resolution, noise blanker and notch filter. There is also an integrated recorder, making it possible to instantly record and playback the received signal.

Apart from audio recording and playback, the receiver can also record an entire 20 kHz wide IF spectrum, making it possible to thoroughly analyze the received signal, and "re-receive" the same signal again and again with different IF filter bandwidths, notch filter, noise blanking or demodulator settings, to arrive at the best possible reception of weak or interference-prone transmissions.

In addition to the real-time narrow-band spectrum analyzer, there is also a wide-band spectrum analyzer which contains additional professional instrumentation facilities: the ability to display minimum and maximum spectrum sweeps, search for peaks, average spectra, save and print spectra, marker mode, etc.

Another useful feature, previously unavailable with receivers of this price class, is a test and measurement facility, performing measurements on the received signal including frequency accuracy, amplitude modulation depth, frequency deviation, THD (total harmonic distortion) and SINAD. An audio spectrum analyzer is also included, making it possible to observe the demodulated spectrum in real-time with a resolution of 5 Hz.

The unique research and education function makes it possible to explore interactive block diagrams of the software-defined demodulator, for each demodulation mode, and observe demodulation taking place on real-time signals using two spectrum analyzers and a vector voltmeter.

The Client/Server Option makes it possible to control the receiver remotely via LAN or Internet. The receiver may be located physically on the opposite side of the globe, but to the user it will appear as if it was connected locally.

 
WR-G313e Package

What's included?

The standard WR-G315e package includes:

 WR-G315e receiver
 User's guide
 Application download instructions (CD ROM provided on request, as shown)
 Low-noise linear power supply
 Start-up antenna
 USB cable
 BNC-to-SMA adapter

 

System requirements:

 PC with 500 MHz Pentium CPU or faster
 One free USB socket
 Windows XP, Vista, Windows 7, 8 or 10

Interested?
Please use our Rapid Response Form to register your interest in this product, or to request more information.

 Technical Specifications
 Antenna Multiplexer and Frequency Extender Option
 Other Hardware Options
 Digital Decoders
 DRM Decoder Option
 APCO P25 Decoder Option
 Advanced Trunking Option
 Advanced Digital Suite
 Client/Server Option
 Application software download
 WR-G3-PPS-6 Portable Power Supply
 Third party developer's information
 Comparative summary of WiNRADiO Receivers
 WiNRADiO Dealers