WiNRADiO WR-BT-20G Power Injector (Bias 'T')

WR-BT-20G Power Injector (Bias 'T') This device provides a means to inject DC power in a coaxial cable, to power remotely-located devices such as active antennas, low-noise amplifiers and downconverters. It features a very flat frequency response, making it possible to use this device in a very wide frequency range, from 0.01 to 20 GHz.

The WiNRADiO WR-BT-20G Power Injector is especially suitable for use with WiNRADiO AX-808G antenna.

  Features

 Ultra-wideband, 10 MHz to 20 GHz
 Flat frequency response
 Low insertion loss
 Wide range of DC voltages
 Rugged construction
 Simple installation

 

Installation

WiNRADiO WR-BT-20G Bias-T is placed close to the receiver. The power from Bias-T to a device is injected in the coaxial cable. Such arrangement makes it possible to minimize losses in the cable if the antenna is located at a greater distance from the receiver.

A suitable 12 V power supply to use with the WR-BT-20G Power Injector is the WiNRADiO low-noise linear model SF-41.

Technical Specifications
Frequency range 0.01 to 20 GHz
VSWR 2.0 : 1 max (within 0.01 to 14 GHz)
Insertion loss 1 dB (within 0.01 to 14 GHz)
Connectors 2 x SMA
Power jack OD=5.5 mm ID=2 mm (center positive)
Power 12V DC (30 V DC max) @ 270 mA max
Enclosure Diecast aluminium
Size 39.9 x 23.3 x 17.4 mm (1.57 x 0.91 x 0.68 in)
(excluding connectors)
47.1 x 63.1 x 23.3 mm (1.85 x 2.48 x 0.91 in)
(with holder and connectors)
Weight 37 grams (1.3 oz)
48 grams (1.69 oz) with holder

Specifications are subject to change without notice due to continuous product development and improvement.

Interested? Please use our Rapid Response Form to register your interest in this product, or to request more information.