The following factory-fitted hardware options are available for WR-G39DDCe receiver:
Wall-mounting bracket (WR-G3E-WMB)
This wall mounting bracket makes it possible to mount the WR-G39DDCe receiver to a wall or under a desk, thus saving desk space. Also useful for installation in boats and vehicles. An elegant and useful accessory.
External Reference Input Option (/XR)
This option makes it possible to connect an external 10 MHz reference oscillator for the highest possible frequency accuracy. The input is AC coupled and has an internal impedance of 50 ohm. The reference oscillator signal can be either sine or square wave between -1 and +10 dBm. The reference input is enabled under software (in the receiver application, under top menu bar Options | External Reference).
Reference Output Option (/RO)
This option can be used to output the internal reference frequency. This is useful for situations when the receiver's own internal oscillator is to be used as a reference for other equipment, or, if an external reference is used, to provide this external reference to other receivers in a daisy-chain arrangement. The output is AC coupled, sine-wave at +2 dBm @ 50 ohm impedance (or +5 dBm if external reference is enabled). It can be directly connected to an external reference oscillator input of another WR-G39DDCi receiver. Note that the output is available when the receiver application is running and the receiver is turned on.
Low profile radiator (/LP)
The G39DDCe/LP option provides an alternative factory fitted low profile cooling radiator.
This option extends the receiver's operating temperature by ~4 °C and is suited for low profile installations, or wall mounting.
|
