WR-G526e Detailed Technical Specifications

WR-G526e/TM Tuner Module

Input frequency range 20 - 3000 MHz
Tuning resolution 10 Hz
Output frequency 21.4 MHz
Output bandwidth 22 MHz
Gain 30 dB typ.
Noise figure 12 dB typ. @ 100 MHz
Internal spurii -105 dBm typ.*
IF rejection >60 dB
Maximum input level +10 dBm
Attenuation control 0-30 dB switchable front-end attentuator in 2 dB steps,
20 dB switchable attenuator in IF path
IP3 0 dBm typ.
Input impedance 50 ohm (SMA connector) for each channel
Output impedance 50 ohm (SMA connector) for each channel
Amplitude ripple 3 dB typ.
Phase ripple 3 degrees typ.
Phase adjustment range 20 degrees typ.
Phase adjustment resolution 0.1 degrees typ.
Channel-to-channel isolation >80 dB
Operating voltage 12 V DC ±5%
Power consumption 8 W typ.
Dimensions 150 x 90 x 30 mm (5.9" x 3.5" x 1.2")
Weight 330 g (11.6 oz)
Operating temperature -10º to +60º C
Humidity 20-90% non-condensing

WR-G526e/RM Reference Oscillator and Distribution Module

Total oscillator phase noise -86 dBc/Hz @ 10 kHz
Tuning speed 16 ms typ.
Settling speed 0.8 ms / MHz typ.
Frequency stability 0.01 ppm
Operating voltage 12 V DC ±5%
Power consumption 8 W typ.
Dimensions 150 x 90 x 45 mm (5.9" x 3.5" x 1.8")
Weight 650 g (23 oz)
Operating temperature -10º to +60º C
Humidity 20-90% non-condensing

WR-G526e/RMF Reference Oscillator and Distribution Module (Ultra Fast Version)

Total oscillator phase noise -115 dBc/Hz @ 10 kHz
Tuning speed 5 ms typ.
Settling speed 3 ms typ.
Frequency stability 0.01 ppm
Operating voltage 12 V DC ±5%
Power consumption 12 W typ.
Dimensions 150 x 90 x 45 mm (5.9" x 3.5" x 1.8")
Weight 660 g (23.3 oz)
Operating temperature -10º to +60º C
Humidity 20-90% non-condensing

WR-G526e/SC Integrated Single-channel Module

Input frequency range 20 - 3000 MHz
Tuning resolution 10 Hz
Output frequency 21.4 MHz
Output bandwidth 22 MHz
Gain 30 dB typ.
Noise figure 12 dB typ. @ 100 MHz
Total LO phase noise -86 dBc/Hz @ 10 kHz
Internal spurii -105 dBm typ.*
Tuning speed 16 ms typ.
Settling speed 0.8 ms / MHz typ.
Frequency stability 0.01 ppm
IF rejection >60 dB
Maximum input level +10 dBm
Attenuation control 0-30 dB switchable front-end attentuator in 2 dB steps,
20 dB switchable attenuator in IF path
IP3 0 dBm typ.
Input impedance 50 ohm (SMA connector)
Output impedance 50 ohm (SMA connector)
Operating voltage 12 V DC ±5%
Power consumption 8 W typ.
Dimensions 150 x 90 x 45 mm (5.9" x 3.5" x 1.8")
Weight 650 g (23 oz)
Operating temperature -10º to +60º C
Humidity 20-90% non-condensing

* As a result of the heterodyne process, a small number of spurii exist on certain frequencies (approx 15 frequencies in the entire 20-3000 MHz range), which are above the typical -105 dBm level. The average equivalent antenna level of these spurii is -95 dBm. No spurii exceed the -85 dBm level.

Due to continuous product improvement, specifications are subject to change without notice.



 WR-G526e General Information
 WR-G526e Software Support
 WR-G526e Experimental Platform
 WR-G526e/DSP Back-End
 How to Order

Interested? Please use our Rapid Response Form to register your interest in this product, or to request more information.