WA-0208/HU Antenna Distribution Unit

WA-0208/HU Antenna Distribution Unit - Front Panel

The WiNRADiO WA-0208/HU dual-input antenna distribution unit combines a combiner and a splitter device in an optimum combination, particularly suited for general broadcasting or other professional HF/VHF applications where a single antenna needs to be connected to up to 8 receivers. While this model is particularly suited for WiNRADiO multichannel receiver systems such as the MS-8118/G3 Multichannel Broadcast Monitoring System, it can be also used with any third-party receivers and antennas.

Features

 Freq. range 0.15-50 MHz (input 1) and 50-1600 MHz (input 2)
 Inbuilt low-noise preamplifier
 Two antenna inputs, 8 receiver outputs
 High IP3 amplifier
 High isolation between ports
 Rack mount 1RU 19" enclosure
 Custom configurations available

Internally, the product consists of a combiner, low-noise preamplifier with a high third-order intercept point, followed by a high-isolation power splitter.

The WA-0208/HU antenna distribution units are eminently suitable for broadcasting, industrial, government, military and other demanding high-end applications.


Rear Panel

WA-0208/HU Antenna Distribution Unit - Rear Panel

The two antenna inputs use N-type connectors and the 8 outputs use SMA-type connectors located at the rear of the device. The fused mains power socket accommodates standard US and European voltages using a standard IEC computer power cord.

Technical Specifications
Configuration 2 inputs, 8 outputs
Frequency range 0.15 to 50 MHz (input 1)
50-1600 MHz (input 2)
Gain 2 dB @ 20 MHz typ.
5 dB @ 500 MHz typ.
Amplifier NF 8 dB @ 20 MHz typ.
4 dB @ 500 MHz typ.
Impedance 50 ohm (input and all outputs)
Max. input level +13 dBm for no damage
Input IP3 +27 dBm typ. @ 20 MHz
+10 dBm typ. @ 100 MHz
Isolation 50 dB typ.
Input VSWR 1 : 2.0
Output VSWR 1 : 1.3
RF Connectors 8 x SMA female and 2 x N-type female
Power 120/240 V AC 15 W
Dimensions Width: 19" rack
Height: 1RU (1.75" = 44.5 mm)
Depth: 12.2" (310 mm)
Weight 4.62 lb (2.1 kg)

Note:
1. All values are typical.
2. Specifications are subject to change without notice due to continuous product development and improvement.

 

Interested? Please use our Rapid Response Form to register your interest in this product, or to request more information.